VMP Odin Supercharger Tuner Kit Stage 3 – Gen2/Gen3 Coyote 5.0 L
Stage 3 designates our factory “race port” utilizing Magnuson DFT technology. Stage 3 is only recommended when pulleying for 16 psi or more.
VMP Performance Supercharger Tuner Kits are built around our most popular head-units and allow the customer to select the accessory items they want for their particular chassis and build. Odin Tuner Kits are designed for engine swaps in pre-emissions 1964 and earlier vehicles. Kits should be selected based on the engine & ECU used and the desired power output. The Odin supercharger system is capable of 600 rwhp to 1200+ rwhp. Standard Stage 2 head-units and Stage 3 factory ported head-units are available.
Tuner kits include:
VMP/Magnuson Odin Supercharger Head Unit
VMP Billet Fuel rails with #8 ports, stock feed line adapters included
Intercooler hoses
Odin Degas Bottle*
Supercharger pulley of your choice (must add to cart for it to be shipped with your tuner kit)
K060722 Belt
VMP Street No-Grind FEAD System*
Bosch brushless intercooler pump and relay harness
IAT sensor and harness for the appropriate year Mustang or F-150
PnP adapter harnesses for throttle body
All mounting hardware and gaskets
The above list is everything you need to wire and plumb an Odin head unit on a Coyote engine. See below for the required air induction, cooling, fueling, and tuning.
Customer will need to purchase:
Throttle body
Customer has the option of VMP Twinjet or VMP Monoblade
Loki adapter plates for stock 80 mm throttle body available
Odin uses the factory GT500 bolt pattern
Mechanical-linkage throttle bodies available
Cold air intake
VMP Odin CAIs are available at a discounted price when purchased with a tuner kit
Use Loki airbox coupler kits with stock TB and stock airbox
Our GT500-style throttle bodies use a 5-inch coupler
Heat exchanger
Customer has the option of VMP Single Pass or Triple Pass
We recommend VMP Multi-Pass when using an upgraded pump
Option to add fans as desired (VMP-11INCHFAN)
Injectors
VMP Odin uses short 48 mm style injectors, found stock in ‘07-12 and ‘13-14 GT500
Common aftermarket injectors from ID, DW, FIC may be used by removing the top hat
Tuning
VMP Level 3 tune must be purchased for Coyote cars and trucks
VMP Level X tune must be purchased for engine swaps with Ford Control Pack
Upgrades:
Customers have the option to add a variety of upgrades from the VMP catalog to push their Odin Supercharger Kit to its maximum horsepower potential.
Fuel system upgrades:
VMP Fuel Pump Booster (Mustang VMP-ENF000 or F150 VMP-ENF021)
VMP Plug and Play Return Style Fuel System
’11-’17 Mustang (VMP-ENF024)
’18+ Mustang (VMP-ENF043)
Common upgrades for the cooling system:
VMP Odin Ice Tank (VMP-SUC057)
Larger intercooler pumps (EMP or CJ/CMAX)
1” lines
High-flow intercooler cores (coming soon!)
Common upgrades for the belt system:
VMP HD Tensioner for No-Grind FEAD (VMP-SUT009)
VMP Atlas Bracket for 6-/8-/10-Rib (VMP-ODT010)
VMP AC Bypass Tensioner Bracket for AC compressor removal or ground-on front covers
Pulleys in 6-, 8-, and 10-rib configurations
Smaller supercharger pulleys from stock 3.5” down to 2.4” in .100” increments
GripTec supercharger pulleys from 2.9” down to 2.4”
10% and 20% overdrive balancers add 2 psi and 4 psi, respectively
8-rib and 10-rib belt drive kits with and without AC
Upgrade kits used existing upper FEAD bracket
Full-FEAD kits include adjustable idler bracket
*Any parts purchased with a tuner kit that would result in duplicate or additional parts will result in the base components being removed from the kit leaving only the upgraded components. Example: by purchasing an upgraded tensioner, adjustable FEAD bracket, smaller pulley, or tank, the standard items will be omitted due to the purchase of upgraded components.
Reviews
There are no reviews yet.